GetMyRoofCost
Material Cost Guide

Standing Seam Metal Roof Cost.

$1,100 – $1,850 per square installed nationally for Metal — Standing Seam — $26,400 – $44,400 for a typical 24-square roof, including tear-off of one layer. Lifespan: 40-60 years.

MaterialPer squareTypical 24-square roofLifespan
Metal — Standing Seam$1,100 – $1,850$26,400 – $44,40040-60 years

Metal — Standing Seam

Concealed-fastener metal panels: the premium metal roof, built to outlast two shingle roofs.

Worked example: a 24-square roof at the national band runs $26,400 – $44,400 installed, including tear-off of one layer, underlayment, and standard flashing. In Washington, labor adjusts that to $27,900 – $46,950.

Pros

  • 40-60 year life with concealed fasteners
  • Best snow-shedding and wind performance of any metal profile
  • Clean architectural lines

Cons

  • Premium installed cost
  • Needs installers who specialize in the profile
  • Repairs require panel-level expertise

Best for: Forever homes, snowy climates, and low-slope sections where shingles struggle.

Sources: Angi (2026 cost data): Metal roofing $7-$16 per sq ft installed; standing seam at the top of the band; Peer calculator tables (2026): Standing seam $1,800-$2,450 per square installed in worked examples — above our high bound; see notes; This Old House / Homewyse (2026): Metal (all profiles) $19.30 per sq ft average ($1,930 per square). Full sourcing on the methodology page.

Price your own roof with the free satellite estimator or the manual calculator — same dataset, your measurements.

Fair Questions

Asked by every homeowner.

How much does a standing seam roof cost?

Installed nationally, Metal — Standing Seam runs $1,100 – $1,850 per square (100 sq ft), or about $26,400 – $44,400 for a typical 24-square roof — including tear-off of one layer, underlayment, and standard flashing. State labor moves the range; Washington runs $1,163 – $1,955 per square.

How long does a standing seam roof last?

Expect 40-60 years from a properly installed metal — standing seam roof with adequate ventilation. Underlayment and flashing quality — the invisible half — decide whether a roof reaches the top of that range.

Is the satellite estimate free for this material too?

Yes. The estimator measures your roof once and re-prices it across every material instantly, from the same measurements and the same published dataset.